Commit 2568ec23 authored by Dan Povey's avatar Dan Povey
Browse files

sandbox/online: adding some new files from trunk that were skipped in the last merge.

git-svn-id: https://svn.code.sf.net/p/kaldi/code/sandbox/online@4319 5e6a8d80-dfce-4ca6-a32a-6e07a63d50c8
parent 7d8da8bb
#!/bin/bash
. cmd.sh
# This step interpolates a small RNNLM (with weight 0.15) with the 4-gram LM.
steps/rnnlmrescore.sh --rnnlm_ver rnnlm-hs-0.1b \
--N 100 --cmd "$decode_cmd" --inv-acwt 17 \
0.15 data/lang_test_bd_fg data/local/rnnlm-hs.h30.voc10k data/test_eval92 \
exp/tri3b/decode_bd_tgpr_eval92_fg exp/tri3b/decode_bd_tgpr_eval92_fg_rnnlm-hs30_0.15 \
|| exit 1;
steps/rnnlmrescore.sh --rnnlm_ver rnnlm-hs-0.1b \
--N 100 --cmd "$decode_cmd" --inv-acwt 17 \
0.3 data/lang_test_bd_fg data/local/rnnlm-hs.h100.voc20k data/test_eval92 \
exp/tri3b/decode_bd_tgpr_eval92_fg exp/tri3b/decode_bd_tgpr_eval92_fg_rnnlm-hs100_0.3 \
|| exit 1;
steps/rnnlmrescore.sh --rnnlm_ver rnnlm-hs-0.1b \
--N 100 --cmd "$decode_cmd" --inv-acwt 17 \
0.3 data/lang_test_bd_fg data/local/rnnlm-hs.h300.voc30k data/test_eval92 \
exp/tri3b/decode_bd_tgpr_eval92_fg exp/tri3b/decode_bd_tgpr_eval92_fg_rnnlm-hs300_0.3 \
|| exit 1;
steps/rnnlmrescore.sh --rnnlm_ver rnnlm-hs-0.1b \
--N 100 --cmd "$decode_cmd" --inv-acwt 17 \
0.3 data/lang_test_bd_fg data/local/rnnlm-hs.h400.voc40k data/test_eval92 \
exp/tri3b/decode_bd_tgpr_eval92_fg exp/tri3b/decode_bd_tgpr_eval92_fg_rnnlm-hs400_0.3 \
|| exit 1;
steps/rnnlmrescore.sh --rnnlm_ver rnnlm-hs-0.1b \
--N 1000 --cmd "$decode_cmd" --inv-acwt 17 \
0.3 data/lang_test_bd_fg data/local/rnnlm-hs.h400.voc40k data/test_eval92 \
exp/tri3b/decode_bd_tgpr_eval92_fg exp/tri3b/decode_bd_tgpr_eval92_fg_rnnlm-hs400_0.3_N1000
steps/rnnlmrescore.sh --rnnlm_ver rnnlm-hs-0.1b \
--N 1000 --cmd "$decode_cmd" --inv-acwt 17 \
0.3 data/lang_test_bd_fg data/local/rnnlm-hs.h400.voc40k data/test_eval92 \
exp/tri3b/decode_bd_tgpr_eval92_fg exp/tri3b/decode_bd_tgpr_eval92_fg_rnnlm-hs400_0.3_N1000 \
|| exit 1;
dir=exp/tri3b/decode_bd_tgpr_eval92_fg_rnnlm-hs400_0.4_N1000
rm -rf $dir
cp -r exp/tri3b/decode_bd_tgpr_eval92_fg_rnnlm-hs400_0.3_N1000 $dir
steps/rnnlmrescore.sh --rnnlm_ver rnnlm-hs-0.1b \
--stage 7 --N 1000 --cmd "$decode_cmd" --inv-acwt 17 \
0.4 data/lang_test_bd_fg data/local/rnnlm-hs.h400.voc40k data/test_eval92 \
exp/tri3b/decode_bd_tgpr_eval92_fg $dir
dir=exp/tri3b/decode_bd_tgpr_eval92_fg_rnnlm-hs400_0.4
rm -rf $dir
cp -r exp/tri3b/decode_bd_tgpr_eval92_fg_rnnlm-hs400_0.3 $dir
steps/rnnlmrescore.sh --rnnlm_ver rnnlm-hs-0.1b \
--stage 7 --N 100 --cmd "$decode_cmd" --inv-acwt 17 \
0.4 data/lang_test_bd_fg data/local/rnnlm-hs.h400.voc40k data/test_eval92 \
exp/tri3b/decode_bd_tgpr_eval92_fg $dir
dir=exp/tri3b/decode_bd_tgpr_eval92_fg_rnnlm-hs400_0.15
rm -rf $dir
cp -r exp/tri3b/decode_bd_tgpr_eval92_fg_rnnlm-hs400_0.3 $dir
steps/rnnlmrescore.sh --rnnlm_ver rnnlm-hs-0.1b \
--stage 7 --N 100 --cmd "$decode_cmd" --inv-acwt 17 \
0.15 data/lang_test_bd_fg data/local/rnnlm-hs.h400.voc40k data/test_eval92 \
exp/tri3b/decode_bd_tgpr_eval92_fg $dir
steps/rnnlmrescore.sh --rnnlm_ver rnnlm-hs-0.1b \
--N 10 --cmd "$decode_cmd" --inv-acwt 17 \
0.3 data/lang_test_bd_fg data/local/rnnlm-hs.h400.voc40k data/test_eval92 \
exp/tri3b/decode_bd_tgpr_eval92_fg exp/tri3b/decode_bd_tgpr_eval92_fg_rnnlm-hs400_0.3_N10 \
|| exit 1;
dir=exp/tri3b/decode_bd_tgpr_eval92_fg_rnnlm-hs400_0.4_N1000
rm -rf $dir
cp -r exp/tri3b/decode_bd_tgpr_eval92_fg_rnnlm-hs400_0.3_N1000 $dir
steps/rnnlmrescore.sh --rnnlm_ver rnnlm-hs-0.1b \
--stage 7 --N 1000 --cmd "$decode_cmd" --inv-acwt 17 \
0.4 data/lang_test_bd_fg data/local/rnnlm-hs.h400.voc40k data/test_eval92 \
exp/tri3b/decode_bd_tgpr_eval92_fg $dir
dir=exp/tri3b/decode_bd_tgpr_eval92_fg_rnnlm-hs400_0.15_N1000
rm -rf $dir
cp -r exp/tri3b/decode_bd_tgpr_eval92_fg_rnnlm-hs400_0.3_N1000 $dir
steps/rnnlmrescore.sh --rnnlm_ver rnnlm-hs-0.1b \
--stage 7 --N 1000 --cmd "$decode_cmd" --inv-acwt 17 \
0.15 data/lang_test_bd_fg data/local/rnnlm-hs.h400.voc40k data/test_eval92 \
exp/tri3b/decode_bd_tgpr_eval92_fg $dir
dir=exp/tri3b/decode_bd_tgpr_eval92_fg_rnnlm-hs400_0.5_N1000
rm -rf $dir
cp -r exp/tri3b/decode_bd_tgpr_eval92_fg_rnnlm-hs400_0.3_N1000 $dir
steps/rnnlmrescore.sh --rnnlm_ver rnnlm-hs-0.1b \
--stage 7 --N 1000 --cmd "$decode_cmd" --inv-acwt 17 \
0.5 data/lang_test_bd_fg data/local/rnnlm-hs.h400.voc40k data/test_eval92 \
exp/tri3b/decode_bd_tgpr_eval92_fg $dir
#!/bin/bash
# Copyright 2014 Johns Hopkins University (Author: Daniel Povey).
# Apache 2.0.
# This script removes the examples in an egs/ directory, e.g.
# steps/nnet2/remove_egs.sh exp/nnet4b/egs/
# We give it its own script because we need to be careful about
# things that are soft links to something in storage/ (i.e. remove the
# data that's linked to as well as the soft link), and we want to not
# delete the examples if someone has done "touch $dir/egs/.nodelete".
if [ $# != 1 ]; then
echo "Usage: $0 <egs-dir>"
echo "e.g.: $0 data/nnet4b/egs/"
echo "This script is usually equivalent to 'rm <egs-dir>/egs.*' but it handles following"
echo "soft links to <egs-dir>/storage/, and avoids deleting anything in the directory if"
echo "someone did 'touch <egs-dir>/.nodelete"
exit 1;
fi
egs=$1
if [ ! -d $egs ]; then
echo "$0: expected directory $egs to exist"
exit 1;
fi
if [ -f $egs/.nodelete ]; then
echo "$0: not delting egs in $egs since $egs/.nodelete exists"
exit 0;
fi
flist=$egs/egs.*.ark
if [ "$flist" == '$egs/egs.*.ark' ]; then # did not expand..
echo "$0: directory $egs does not seem to contain egs"
exit 1;
fi
for f in $flist; do
if [ -L $f ]; then
rm $(readlink $f) # this will print a warning if it fails.
fi
rm $f
done
echo "$0: Finished deleting examples in $egs"
#!/bin/bash
# Copyright 2014 Johns Hopkins University (Author: Daniel Povey).
# Apache 2.0.
# This script further trains an already-existing neural network,
# given an existing model and an examples (egs/) directory.
# The number of parallel jobs (--num-jobs-nnet) is determined by the
# egs directory.
# Begin configuration section.
cmd=run.pl
num_epochs=10 # Number of epochs of training; number of iterations is
# worked out from this.
num_iters_final=20 # Maximum number of final iterations to give to the
# optimization over the validation set.
learning_rate_factor=1.0 # You can use this to gradually decrease the learning
# rate during training (e.g. use 0.2); the initial
# learning rates are as specified in the model, but it
# will decrease slightly on each iteration to achieve
# this ratio.
combine=true # controls whether or not to do the final model combination.
combine_regularizer=1.0e-14 # Small regularizer so that parameters won't go crazy.
minibatch_size=128 # by default use a smallish minibatch size for neural net
# training; this controls instability which would otherwise
# be a problem with multi-threaded update. Note: it also
# interacts with the "preconditioned" update which generally
# works better with larger minibatch size, so it's not
# completely cost free.
shuffle_buffer_size=5000 # This "buffer_size" variable controls randomization of the samples
# on each iter. You could set it to 0 or to a large value for complete
# randomization, but this would both consume memory and cause spikes in
# disk I/O. Smaller is easier on disk and memory but less random. It's
# not a huge deal though, as samples are anyway randomized right at the start.
mix_up=0
stage=-5
num_threads=16
parallel_opts="-pe smp 16 -l ram_free=1G,mem_free=1G" # by default we use 16 threads; this lets the queue know.
# note: parallel_opts doesn't automatically get adjusted if you adjust num-threads.
cleanup=true
remove_egs=false
prior_subset_size=10000 # 10k samples per job, for computing priors. Should be
# more than enough.
# End configuration section.
echo "$0 $@" # Print the command line for logging
if [ -f path.sh ]; then . ./path.sh; fi
. parse_options.sh || exit 1;
if [ $# != 3 ]; then
echo "Usage: $0 [opts] <input-model> <egs-dir> <exp-dir>"
echo " e.g.: $0 exp/nnet4c/final.mdl exp/nnet4c/egs exp/nnet5c/"
echo "see also the older script update_nnet.sh which creates the egs itself"
echo ""
echo "Main options (for others, see top of script file)"
echo " --config <config-file> # config file containing options"
echo " --cmd (utils/run.pl|utils/queue.pl <queue opts>) # how to run jobs."
echo " --num-epochs <#epochs|15> # Number of epochs of training"
echo " # while reducing learning rate (determines #iterations, together"
echo " # with --samples-per-iter and --num-jobs-nnet)"
echo " --num-epochs-extra <#epochs-extra|5> # Number of extra epochs of training"
echo " # after learning rate fully reduced"
echo " --learning-rate-factor<factor|1.0> # Factor (e.g. 0.2) by which to change learning rate"
echo " # during the course of training"
echo " --num-threads <num-threads|16> # Number of parallel threads per job (will affect results"
echo " # as well as speed; may interact with batch size; if you increase"
echo " # this, you may want to decrease the batch size."
echo " --parallel-opts <opts|\"-pe smp 16 -l ram_free=1G,mem_free=1G\"> # extra options to pass to e.g. queue.pl for processes that"
echo " # use multiple threads... note, you might have to reduce mem_free,ram_free"
echo " # versus your defaults, because it gets multiplied by the -pe smp argument."
echo " --minibatch-size <minibatch-size|128> # Size of minibatch to process (note: product with --num-threads"
echo " # should not get too large, e.g. >2k)."
echo " --num-iters-final <#iters|20> # Number of final iterations to give to nnet-combine-fast to "
echo " # interpolate parameters (the weights are learned with a validation set)"
echo " --mix-up <#mix|0> # If specified, add quasi-targets, analogous to a mixture of Gaussians vs."
echo " # single Gaussians. Only do this if not already mixed-up."
echo " --combine <true or false|true> # If true, do the final nnet-combine-fast stage."
echo " --stage <stage|-5> # Used to run a partially-completed training process from somewhere in"
echo " # the middle."
exit 1;
fi
input_mdl=$1
egs_dir=$2
dir=$3
# Check some files.
for f in $input_mdl $egs_dir/egs.1.0.ark; do
[ ! -f $f ] && echo "$0: expected file $f to exist." && exit 1;
done
mkdir -p $dir/log
# Copy some things from the directory where the input model is located, to the
# experimental directory, if they exist. These might be needed for things like
# decoding.
input_dir=$(dirname $input_mdl);
for f in tree splice_opts cmvn_opts final.mat; do
if [ -f $input_dir/$f ]; then
cp $input_dir/$f $dir/
fi
done
iters_per_epoch=$(cat $egs_dir/iters_per_epoch) || exit 1;
num_jobs_nnet=$(cat $egs_dir/num_jobs_nnet) || exit 1;
num_iters=$[$num_epochs * $iters_per_epoch];
per_iter_learning_rate_factor=$(perl -e "print ($learning_rate_factor ** (1.0 / $num_iters));")
echo "$0: Will train for $num_epochs epochs, equalling $num_iters iterations."
mix_up_iter=$[$num_iters/2]
if [ $num_threads -eq 1 ]; then
train_suffix="-simple" # this enables us to use GPU code if
# we have just one thread.
if ! cuda-compiled; then
echo "$0: WARNING: you are running with one thread but you have not compiled"
echo " for CUDA. You may be running a setup optimized for GPUs. If you have"
echo " GPUs and have nvcc installed, go to src/ and do ./configure; make"
fi
else
train_suffix="-parallel --num-threads=$num_threads"
fi
cp $input_mdl $dir/0.mdl || exit 1;
x=0
while [ $x -lt $num_iters ]; do
if [ $x -ge 0 ] && [ $stage -le $x ]; then
# Set off jobs doing some diagnostics, in the background.
$cmd $dir/log/compute_prob_valid.$x.log \
nnet-compute-prob $dir/$x.mdl ark:$egs_dir/valid_diagnostic.egs &
$cmd $dir/log/compute_prob_train.$x.log \
nnet-compute-prob $dir/$x.mdl ark:$egs_dir/train_diagnostic.egs &
if [ $x -gt 0 ] && [ ! -f $dir/log/mix_up.$[$x-1].log ]; then
$cmd $dir/log/progress.$x.log \
nnet-show-progress --use-gpu=no $dir/$[$x-1].mdl $dir/$x.mdl ark:$egs_dir/train_diagnostic.egs &
fi
echo "Training neural net (pass $x)"
$cmd $parallel_opts JOB=1:$num_jobs_nnet $dir/log/train.$x.JOB.log \
nnet-shuffle-egs --buffer-size=$shuffle_buffer_size --srand=$x \
ark:$egs_dir/egs.JOB.$[$x%$iters_per_epoch].ark ark:- \| \
nnet-train$train_suffix --minibatch-size=$minibatch_size --srand=$x $dir/$x.mdl \
ark:- $dir/$[$x+1].JOB.mdl \
|| exit 1;
nnets_list=
for n in `seq 1 $num_jobs_nnet`; do
nnets_list="$nnets_list $dir/$[$x+1].$n.mdl"
done
$cmd $dir/log/average.$x.log \
nnet-am-average $nnets_list - \| \
nnet-am-copy --learning-rate-factor=$per_iter_learning_rate_factor - $dir/$[$x+1].mdl || exit 1;
if [ "$mix_up" -gt 0 ] && [ $x -eq $mix_up_iter ]; then
# mix up.
echo Mixing up from $num_leaves to $mix_up components
$cmd $dir/log/mix_up.$x.log \
nnet-am-mixup --min-count=10 --num-mixtures=$mix_up \
$dir/$[$x+1].mdl $dir/$[$x+1].mdl || exit 1;
fi
rm $nnets_list
fi
x=$[$x+1]
done
# Now do combination.
# At the end, final.mdl will be a combination of the last e.g. 10 models.
nnets_list=()
[ $num_iters_final -gt $num_iters ] && num_iters_final=$num_iters
[ "$mix_up" -gt 0 ] && [ $num_iters_final -gt $[$num_iters-$mix_up_iter] ] && \
num_iters_final=$[$num_iters-$mix_up_iter]
start=$[$num_iters-$num_iters_final+1]
for x in `seq $start $num_iters`; do
idx=$[$x-$start]
if [ $x -gt $mix_up_iter ]; then
nnets_list[$idx]=$dir/$x.mdl # "nnet-am-copy --remove-dropout=true $dir/$x.mdl - |"
fi
done
if [ $stage -le $num_iters ]; then
if $combine; then
echo "Doing final combination to produce final.mdl"
# Below, use --use-gpu=no to disable nnet-combine-fast from using a GPU, as
# if there are many models it can give out-of-memory error; set num-threads to 8
# to speed it up (this isn't ideal...)
this_num_threads=$num_threads
[ $this_num_threads -lt 8 ] && this_num_threads=8
num_egs=`nnet-copy-egs ark:$egs_dir/combine.egs ark:/dev/null 2>&1 | tail -n 1 | awk '{print $NF}'`
mb=$[($num_egs+$this_num_threads-1)/$this_num_threads]
[ $mb -gt 512 ] && mb=512
# Setting --initial-model to a large value makes it initialize the combination
# with the average of all the models. It's important not to start with a
# single model, or, due to the invariance to scaling that these nonlinearities
# give us, we get zero diagonal entries in the fisher matrix that
# nnet-combine-fast uses for scaling, which after flooring and inversion, has
# the effect that the initial model chosen gets much higher learning rates
# than the others. This prevents the optimization from working well.
$cmd $parallel_opts $dir/log/combine.log \
nnet-combine-fast --initial-model=100000 --num-lbfgs-iters=40 --use-gpu=no \
--num-threads=$this_num_threads --regularizer=$combine_regularizer \
--verbose=3 --minibatch-size=$mb "${nnets_list[@]}" ark:$egs_dir/combine.egs \
$dir/final.mdl || exit 1;
# Normalize stddev for affine or block affine layers that are followed by a
# pnorm layer and then a normalize layer.
$cmd $parallel_opts $dir/log/normalize.log \
nnet-normalize-stddev $dir/final.mdl $dir/final.mdl || exit 1;
# Compute the probability of the final, combined model with
# the same subset we used for the previous compute_probs, as the
# different subsets will lead to different probs.
$cmd $dir/log/compute_prob_valid.final.log \
nnet-compute-prob $dir/final.mdl ark:$egs_dir/valid_diagnostic.egs &
$cmd $dir/log/compute_prob_train.final.log \
nnet-compute-prob $dir/final.mdl ark:$egs_dir/train_diagnostic.egs &
else
echo "$0: --combine=false so just using last model."
cp $dir/$x.mdl $dir/final.mdl
fi
fi
if [ $stage -le $[$num_iters+1] ]; then
echo "Getting average posterior for purposes of adjusting the priors."
# Note: this just uses CPUs, using a smallish subset of data.
rm $dir/post.*.vec 2>/dev/null
$cmd JOB=1:$num_jobs_nnet $dir/log/get_post.JOB.log \
nnet-subset-egs --n=$prior_subset_size ark:$egs_dir/egs.JOB.0.ark ark:- \| \
nnet-compute-from-egs "nnet-to-raw-nnet $dir/final.mdl -|" ark:- ark:- \| \
matrix-sum-rows ark:- ark:- \| vector-sum ark:- $dir/post.JOB.vec || exit 1;
sleep 3; # make sure there is time for $dir/post.*.vec to appear.
$cmd $dir/log/vector_sum.log \
vector-sum $dir/post.*.vec $dir/post.vec || exit 1;
rm $dir/post.*.vec;
echo "Re-adjusting priors based on computed posteriors"
$cmd $dir/log/adjust_priors.log \
nnet-adjust-priors $dir/final.mdl $dir/post.vec $dir/final.mdl || exit 1;
fi
sleep 2
echo Done
$remove_egs && steps/nnet2/remove_egs.sh $dir/egs
if $cleanup; then
echo Removing most of the models
for x in `seq 0 $num_iters`; do
if [ $[$x%100] -ne 0 ] && [ $x -lt $[$num_iters-$num_iters_final+1] ]; then
# delete all but every 100th model; don't delete the ones which combine to form the final model.
rm $dir/$x.mdl
fi
done
fi
nnet-init
\ No newline at end of file
#!/bin/bash
# Make sure we are in the tools/ directory.
if [ `basename $PWD` == extras ]; then
cd ..
fi
! [ `basename $PWD` == tools ] && \
echo "You must call this script from the tools/ directory" && exit 1;
echo "Installing RNNLM-HS 0.1b"
cd rnnlm-hs-0.1b
make
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment